This is our M30 BB for installing a Praxis M30 crank into a BB86 Road frames, a BB90 MTB frame or BB92 MTB frame.

SPECIFICATIONS
INTRUCTIONS	⚠️ VIEW MANUAL HERE
PRODUCT	BB PF41mm This one press fit BB is used for many frame types that have a 41mm Diameter See list below in measurements.
BUY THIS IF :	You are installing a Praxis M30 alloy spindle crank into bicycle frame with a press fit 41mm bore, and has the measurements below.
FRAME SPEC WIDTH & USE	⚠️This one BB is used for these frame types that have a 41mm Diameter : BB86 - ROAD & BMX \| 86.5mm Width BB90 - MTN ONLY \| 89.5mm Width BB92 - MTN ONLY \| 92mm Width BB104.5 - DH MTN \| 104.5mm Width BB107 - DH MTN \| 107mm Width Helpful frame shell guide here
BEARINGS	Steel press fit with integrated bearing. New Ceramic Option now Avail! 30mm DRIVE / 28mm Non-DRIVE
TOOL	⚠️This specific M30 BB is a press fit. Use BB press tool/drift for installation, and a cup-removal tool for removal. These are very specific tools so talk to your local bike shop if you do not own them. See Instruction link.
MFG	Unique precision ground steel integrated design in which the bearing race and carrier are all in one.
AVG. WEIGHT	65g
NOTE	Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with our Praxis M30 spindles. A drive-side wave washer is used for preload of the bearings.

SPECIFICATIONS
INTRUCTIONS	MANUAL HERE
PRODUCT	Main Bolt/Self-Etractor for Praxis ETOR eCRANKS ONLY
BUY THIS IF :	You have one of our ETOR eCranks and need to replace this bolt/self-etractor.
MEASUREMENT	- 8mm hex. for install and removal of arm \| 40Nm Torque - M19 thread x 1.0mm pitch x 18mm length
TOOL	8mm Hex and Torque wrench is all that is needed for arm install/removal Cassette tool is used to unthread the self-extractor if ever needed.

Praxis ETOR Crank bolt kit